_ _ SBR40U60CT using state-of-the-art sbr ic process technology, the following features are made possible in a single device: major ratings and characteristics characteristics values units device optimized for low forward voltage drop to maximize efficiency in power supply applications i f(av) 40 rectangular waveform a v rrm 60 v v f @ 20a, tj=125 o c 0.48 v, typ mechanical: tj -65 to 150 (operating/storage) o c * molded plastic to-220 package electrical: * low forward voltage drop * reliable high temperature operation * super barrier design * softest, fast switching capability * 150 o c operating junction temperature maximum ratings and electrical characteristics (at 25 o c unless otherwise specified) symbol units dc blocking voltage working peak reverse voltage peak repetitive reverse voltage v rm v rwm v rrm 60 volts average rectified forward current (rated v r -20khz square wave) - 50% duty cycle i o 40 amps peak forward surge current - 1/2 60hz i fsm 300 amps peak repetitive reverse surge current (2us-1khz) i rrm 3 amps instantaneous forward voltage (per leg) i f = 20a; t j = 25 o c i f = 20a; t j = 125 o c v f * typ --- --- max 0.69 0.60 volts maximum instantaneous reverse current at rated v rm t j = 25 o c t j = 125 o c i r typ --- --- max 0.5 100 ma ma maximum rate of voltage change (at rated v r ) dv/dt 10,000 v/us maximum thermal resistance jc (per leg) r jc 2 o c/w operating and storage junction temperature t j -65 to +150 o c * pulse width < 300 us, duty cycle < 2% ______________________________________________________________________________________________ www.apdsemi.com version 1.0 - august 2006 1 1 3 2 anode common cathode anode
_ _ SBR40U60CT figure 1: typical reverse current (per leg) figure 2: typical forward voltage (per leg) figure 3: current derating, case (per leg) ______________________________________________________________________________________________ www.apdsemi.com version 1.0 - august 2006 2 apd semiconductor reserves the right to make changes without further notice to any products herein. apd semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does apd semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in apd semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. apd semiconductor does not convey any license under its patent rights nor the rights of others. apd semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apd semiconductor product could create a situation where personal injury or death may occur. should buyer purchase or use apd semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold apd semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that apd semiconductor was negligent regarding the design or manufacture of the part.. 0 10 20 0 25 50 75 100 125 150 tc, case temp (c) if, average forward current (amps) 0.1 1 10 100 0 102030405060 vr, reverse voltage (volts) ir, reverse current (ma) tj=25c tj=100c 1 10 100 0.1 0.2 0.3 0.4 0.5 0.6 vf, instantaneous forward voltage (volts) if, instantaneous forward current (amps) tj=25c tj=125c tj=75c tj=100c 1 lagoon drive, suite 410, redwood city, ca 94065, usa ph: 650 508 8896 fax: 650 508 8865 homepage: www.apdsemi.com email: info@apdsemi.com tj=75c tj=125c
|
